Call for a FREE Quote Now!

How To Connect Two Gutter Sections?

Connecting two sections of gutters isn’t as simple as it seems at first glance. Most people believe that if you cut the old gutter in half, you can easily attach the new vinyl or metal piece to each end of the gutter section – but that isn’t always the case.

If you want your vinyl or metal gutters to last for many years, you need to connect them correctly. Here are some tips on how to connect two sections of gutters using aluminum, vinyl, or copper gutters.

DIY Vs Hiring A Pro


When installing gutters, a lot of homeowners don’t know whether they should attempt to install them themselves or hire a pro. There are benefits and drawbacks to both. Some think DIY is less expensive, while others believe that doing it yourself takes too much time—and if you make a mistake or have an issue with your gutters in the future, you’ll be on your own.

A reputable contractor who is experienced in the gutter installation will have all of his or her supplies ready when they arrive at your home; they can use these same supplies for all their jobs so it’s not necessary for them to come back again later in order to do more work.

How To Connect Two Sections Of Gutters

They also won’t waste any time driving around looking for materials since everything they need is right there. If you choose to go with a professional, hiring one means there will be no mistakes made during installation and that everything has been tested beforehand.

This way, once your new gutters are installed, you can feel confident knowing they won’t leak or fall apart within months. It’s important to find a contractor who does excellent work because it’ll mean fewer issues down the road.

Selecting Materials

First, you have to choose between metal and vinyl gutters. Hacksaw or tin snips are typically used for aluminum gutters; if your gutter sections are made of vinyl, a good pair of pruning shears should do. If you want your joint to be completely waterproof, apply a layer of gutter sealant (or silicone caulking) before screwing pieces together.

This can be messy work; wear gloves, goggles, and an old shirt so you don’t get sealant on anything else. Make sure you cover all surrounding areas as well—it’s very difficult to remove once it dries. Using galvanized sheet metal screws is a great way to connect your gutters.

However, it’s important that they have at least 3/4-inch shanks; otherwise, they may not go through both layers of sheet metal in one pass. You’ll also need to pre-drill holes with a drill bit slightly smaller than the screws’ shank diameter in order for them to go through both layers of sheet metal easily.

Make sure that there’s enough room between adjacent downspout elbows for water flow, as well as between each section of the gutter itself—you don’t want joints touching! to make safe gutter section.

What Kinds of Gutter Connectors Do I Need?

Gutter systems have a few different components: downspouts, gutters, corners, gutter sealant, and connectors. The purpose of each part is fairly intuitive. But as with any system (water or otherwise), there are different kinds of connectors, each designed for a specific situation.

Here’s a quick breakdown of what you need in terms of gutter connectors and where they can be used. An example section of 4-inch vinyl gutter running off an existing 3-inch pipe outlet onto a new 4-inch corner, into an existing 3-inch rain barrel downspout outlet, and back into an existing 3-inch rain barrel at ground level.

Keep it simple by using one size connector per joint: If your vinyl gutters will be connected to metal downspouts or another type of connector, use a male-to-male connector.

They’re relatively inexpensive (usually $1-$2 per foot) and available at most hardware stores. You’ll also want some form of sealing tape—usually included with your male-to-male connectors—to wrap around your joints to keep water from leaking out between them.

Installing Attachments

When installing attachments, like bird feeders or rain chains, make sure that they are properly positioned so that water can flow freely out of your gutters. Otherwise, you risk having your home’s foundation rot from all of the built-up moisture. Keep eye on gutter section.

This can be a huge problem, especially if you live in an area where there is a lot of rainfall throughout the fall, winter, and spring months. It may be best to hire a professional for installation if you have no experience with roofing or waterproofing materials. You also want to be sure that whatever method you use for attachment (rivets, screws, or adhesives) will not compromise your gutter’s integrity.

If you do plan on attaching something to your gutters yourself, take extra care when drilling holes through them. Also, it’s important to note that metal gutters should never be used with anything but metal attachments.

If you try using wood or plastic parts with metal gutters, they could rust and weaken over time. If you have vinyl gutters, it’s perfectly fine to attach items made from any other material—including wood—to them as long as they don’t weigh too much and cause damage.

Installing Downspouts

With the right gutter length, it’s all about getting water away from your house. So, once you’ve got downspouts set up in a strategic way (located at or near a low spot on your property), make sure they’re draining into an appropriate runoff area like a dry well or landscaped yard.

When you need new gutters, talk with a professional who can help determine how many sections of gutter you’ll need based on roofline length and their material choice (vinyl or metal). You can also ask the professionals regarding the installation of the gutter slope, rain gutters, and seam gutters. They will also walk you through what type of sealant is appropriate for different types of gutters, depending on where they’re being installed.


There is a lot of preparation involved in creating gutters for a straight-run gable roof edge. And while they might seem like an incredibly straightforward home improvement project, there are plenty of things you can do to ensure your gutters are installed correctly than secure them with pop rivets.

While it may seem intimidating at first, proper gutter installation is something you can tackle on your own—as long as you take the time to plan ahead, do your research, and make sure you’re buying quality materials for your project. Follow the above tips for how to install gutters correctly and enjoy water-tight protection for years.


Gutter Cleaning Works?